N Level set mode (Continued)
CW RX HPF/LPF
– – – – – – –
Sets the low-pass filter (100 to 2000 Hz) and high-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in CW mode. (default: OFF)
RTTY RX HPF/LPF
– – – – – – –
Sets the low-pass filter (100 to 2000 Hz) and high-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in RTTY mode. (default: OFF)
PSK RX HPF/LPF
– – – – – – –
Sets the low-pass filter (100 to 2000 Hz) and high-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in PSK mode. (default: OFF)
SSB TX Tone (Bass)
0
Sets the bass level of the transmit audio tone in SSB
mode from –5 to +5. (default: 0)
Tone (Treble)
0
Sets the treble level of the transmit audio tone in
SSB mode from –5 to +5. (default: 0)
AM TX Tone (Bass)
0
Sets the bass level of the transmit audio tone in AM
mode from –5 to +5. (default: 0)
Tone (Treble)
0
Sets the treble level of the transmit audio tone in AM
mode from –5 to +5. (default: 0)
FM TX Tone (Bass)
0
Sets the bass level of the transmit audio tone in FM
mode from –5 to +5. (default: 0)
Tone (Treble)
0
Sets the treble level of the transmit audio tone in FM
mode from –5 to +5. (default: 0)
121
10
SET MODE
To Next Page
Loading...
