D Data content description (continued)
• Memory content setting
Command : 1A 00
X
er−io, !0 !1 !2−!4 !5−!7
X X X , , XXXXXXXXXXXXXXXXXXXXXX XXXX XX
q, w!8−@7
q, w Memory channel number
0000–0099 : Memory channel 0 to 99
0100 : Programmed scan edge P1
0101 : Programmed scan edge P2
e Select memory setting
00 : OFF
01 : 1
02 : 2
03 : 3
r–i Operating frequency setting
See “• Operating frequency.”
o, !0 Operating mode setting
See “• Operating mode.”
!1 Data mode setting
See “• Data mode setting.”
!2–!4 Repeater tone frequency setting
!5–!7 Tone squelch frequency setting
See “• Repeater tone/tone squelch setting.”
!8–@7 Memory name setting
Up to 10 characters.
See “• Codes for memory name, opening message
and Clock 2 name contents.”
158
12
CONTROL COMMAND
To Next Page
Loading...
