96
14
CONTROL COMMAND
2001 NEW
• Command table (continued)
Command Sub command Description
1A 0548 Send/read FM TX Tone (Treble)
level (0=–5 to 10=+5)
0549 Send/read FM RX Tone (Bass)
level (0 =–5 to 10=+5)
0550 Send/read FM RX Tone (Treble)
level (0=–5 to 10=+5)
0551 Send/read contact number style
(0=Normal, 1=190→ANO,
2=190→ANT, 3=90→NO,
4=90→NT)
0552 Send/read count up trigger chan-
nel (1=M1, 2=M2, 3=M3, 4=M4)
0553 Send/read present number
(1–9999)
0554 Send/read CW side tone gain
(0=min. to 255=max.)
0555 Send/read CW side tone gain limit
(0=OFF, 1=ON)
0556 Send/read CW keyer repeat time
(1=1 sec. to 60=60 sec.)
0557 Send/read CW keyer dot/dash
ratio (28=1:1:2.8 to 45=1:1:4.5)
0558 Send/read rise time (0=2 msec.,
1=4 msec., 2=6 msec., 3=8 msec.)
0559 Send/read paddle polarity
(0=Normal, 1=Reverse)
0560 Send/read keyer type (0=Straight,
1=Bug-key, 2=ELEC-Key)
0561 Send/read mic. up/down keyer set
(0=OFF, 1=ON)
0562 Send/read RTTY filter bandwidth
(0=250 Hz, 1=300 Hz, 2=350 Hz,
3=500 Hz, 4=1 kHz)
0563 Send/read twin peak filter (0=OFF,
1=ON)
0564 Send/read RTTY mark frequency
(0=1275 Hz, 1=1615 Hz,
2=2125 Hz)
0565 Send/read RTTY shift width
(0=170 Hz, 1=200 Hz, 2=425 Hz)
0566 Send/read RTTY keying polarity
(0=Normal, 1=Reverse)
0567 Send/read RTTY decode USOS
(0=OFF, 1=ON)
0568 Send/read RTTY decode new line
code (0=CR,LF,CR+LF, 1=CR+LF)
0569 Send/read number of RTTY de-
coder line (0=2 lines, 1=3 lines)
0570 Send/read scan speed (0=Low,
1=High)
0571 Send/read scan resume (0=OFF,
1=ON)
0572 Send/read NB level (0=0% to
255=100%)
0573 Send/read VOX gain (0=0% to
255=100%)
0574 Send/read anti VOX gain (0=0% to
255=100%)
0575 Send/read VOX delay (0=0.0 sec.
to 20=2.0 sec.)
0576 Send/read Break-IN delay set
(20=2.0d to 130=13.0d)
Command Sub command Description
1A 0517 Send/read one touch repeater set
(0=DUP–, 1=DUP+)
0518 Send/read auto repeater set
(0=OFF, 1=ON-1, 2=ON-2)
0519 Send/read tuner auto start set
(0=OFF, 1=ON)
0520 Send/read PTT tune set (0=OFF,
1=ON)
0521 Send/read 9600 bps mode set
(0=OFF, 1=ON)
0522 Send/read antenna selection
(0=OFF, 1=Manual, 2=Auto)
0523 Send/read speech language
(0=English, 1=Japanese)
0524 Send/read speech speed (0=Slow,
1=Fast)
0525 Send/read S-level speech (0=OFF,
1=ON)
0526 Send/read memo pad numbers
(0=5 ch, 1=10 ch)
0527 Send/read main dial auto TS
(0=OFF, 1=Low, 2=High)
0528 Send/read mic. up/down speed
(0=Low, 1=High)
0529 Send/read quick RIT/∂TX clear
function (0=OFF, 1=ON)
0530 Send/read PBT shifting value
popup set (0=OFF, 1=ON)
0531 Send/read IF filter width popup
set (0=OFF, 1=ON)
0532 Send/read SSB/CW synchronous
tuning function (0=OFF, 1=ON)
0533 Send/read CW normal side set
(0=LSB, 1=USB)
0534 Send/read keyer 1st menu set
(0=Keyer-root, 1=Keyer-send)
0535 Send/read external keypad set
(0=OFF, 1=Keyer send)
0536 Send/read CI-V transceive set
(0=OFF, 1=ON)
0537 Send/read CI-V 731 mode set
(0=OFF, 1=ON)
0538 Send/read speech compressor
level set (0=0 to 10=10)
0539 Send/read SSB TX Tone (Bass)
level (0 =–5 to 10=+5)
0540 Send/read SSB TX Tone (Treble)
level (0=–5 to 10=+5)
0541 Send/read SSB RX Tone (Bass)
level (0 =–5 to 10=+5)
0542 Send/read SSB RX Tone (Treble)
level (0=–5 to 10=+5)
0543 Send/read AM TX Tone (Bass)
level (0 =–5 to 10=+5)
0544 Send/read AM TX Tone (Treble)
level (0=–5 to 10=+5)
0545 Send/read AM RX Tone (Bass)
level (0 =–5 to 10=+5)
0546 Send/read AM RX Tone (Treble)
level (0=–5 to 10=+5)
0547 Send/read FM TX Tone (Bass)
level (0 =–5 to 10=+5)
IC-7400.qxd 02.4.2 11:36 Page 96
To Next Page
Loading...
