Icom IC-7400 - Page 97

84
11
SET MODE
2001 NEW
23. SPEECH Language
When the optional UT-102 VOICE SYNTHESIZER UNIT is
installed, you can select between English and Japan-
ese as the language.
English : Announces in English (default)
Japanese : Announces in Japanese
See p. 89 for unit installation.
23 English
SPEECH Language
24. SPEECH Speed
When the optional UT-102 VOICE SYNTHESIZER UNIT
is
installed, you can select between faster or slower
synthesizer output.
HIGH : Announces faster (default)
LOW : Announces slower
See p. 89 for unit installation.
24 HIGH
SPEECH Speed
25. SPEECH S-Level
When the optional UT-102 VOICE SYNTHESIZER UNIT is
installed, you can have frequency, mode and signal
level announcement. Signal level announcement can
be deactivated if desired.
ON : Announces operating frequency, mode
and receiving signal level. (default)
OFF : Announces operating frequency and
mode only.
See p. 90 for unit installation.
25 ON
SPEECH S-Level
26. Memory Pad Ch
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
5 : 5 memo pads (default)
10: 10 memo pads
26 5
Memory Pad Ch
■ General set mode (continued)
IC-7400.qxd 02.4.2 11:35 Page 84