Icom IC-F7000 Instruction Manual

9
2
BASIC OPERATION
D Using up/down keys
When the display selection is selected the frequency
indication (p. 7), push [
ΩΩ
CLR] or [OK
≈≈
] to move the
cursor to desired tuning steps, then push [
√√
]/[
∫∫
] on
the FRONT panel or [UP]/[DN] on the microphone to
change the frequency.
Push
key to change the
frequency in selected
tuning steps.
Push
key to change the
tuning steps.
or
or
USB HI
RX
P.AMP --0:55
USB HI
RX
P.AMP --0:55
USB HI
RX
P.AMP --0:55
CLR OK
[∫]/[√]
Microphone
or
[Ω CLR]/[OK ≈]
[UP]/[DN]
[Ω CLR]/[OK ≈]
D Using the keypad
Enter the desired frequency using the keypad (0 to 9),
then push [OK
≈≈
].
• Pushing [
ΩΩ
CLR] clears input digits and retrieves the chan-
nel.
Push
Push
Push
USB HI
RX
P.AMP --0:55
USB HI
RX
P.AMP --0:55
USB HI
RX
P.AMP --0:55
[EXAMPLE]: Entering 12.3450 MHz
1
QZ
2
ABC
3
DEF
4
GHI
5
JKL
0
@?
OK
Microphone
[OK ≈]
[10-key]
or
[OK ≈]
[10-key]
■ Setting a frequency

Icom IC-F7000 Specifications

General

Brand	Icom
Model	IC-F7000
Category	Transceiver
Language	English