Icom, Icom Inc. and the are registered trademarks of
Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other
countries.
ii
FOREWORD ……………………………………………i
IMPORTANT …………………………………………… i
EXPLICIT DEFINITIONS …………………………… i
PRECAUTION ………………………………………… i
TABLE OF CONTENTS …………………………… ii
1PANEL DESCRIPTION ………………………… 1–6
■ Front panel— Controller ………………………… 1
■ Front panel— Main unit ………………………… 3
■ Microphone (HM-155) ………………………… 4
■ LCD screen ……………………………………… 5
2 BASIC OPERATION ………………………… 7–11
■ Selecting a channel …………………………… 7
■ Scan function …………………………………… 8
■ Setting a frequency ……………………………… 9
■ Mode selection ………………………………… 10
■ Simple mode operation ……………………… 10
■ Split frequency operation ……………………… 11
3 RECEIVE AND TRANSMIT ………………… 12–18
■ Basic voice transmit/receive ………………… 12
■ Functions for transmit ………………………… 13
■ Functions for receive ………………………… 15
■ CW operation …………………………………… 18
■ FSK operation ………………………………… 18
4 SELCALL/ALE OPERATION ……………… 19–30
■ Selcall/ALE ……………………………………… 19
5 CHANNEL/ID PROGRAMMING …………… 31–35
■ Programming a channel ……………………… 31
■ Programming an ID …………………………… 33
6 SET MODE …………………………………… 36–53
■ Quick set mode ………………………………… 36
■ Initial set mode ………………………………… 40
■ CPU reset ……………………………………… 53
7 CONNECTION AND INSTALLATION …… 54–50
■ Supplied accessories ………………………… 54
■ Connections ……………………………………55
■ Ground connection …………………………… 56
■ Power source …………………………………… 56
■ Antenna ………………………………………… 57
■ Mounting ………………………………………… 58
■ Fuse replacement ……………………………… 60
■ Connector information ………………………… 61
8 SPECIFICATIONS ……………………………… 63
9 OPTIONS ………………………………………… 64
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
PANEL DESCRIPTION
BASIC OPERATION
RECEIVE AND TRANSMIT
SELCALL /ALE OPERATION
CHANNEL/ID PROGRAMMING
SET MODE
CONNECTION AND INSTALLATION
SPECIFICATIONS
OPTIONS
Versions of the IC-F7000 which display
the “N33” symbol on the serial number
seal, comply with Standard Australia
Specification No. AS/NZS 4770: 2000.
To Next Page
Loading...
