Icom IC-F7000 Instruction Manual

11
2
BASIC OPERATION
Split frequency operation allows you to transmit and
receive on two different frequencies.
q While in Frequency indication (p. 7), push [I/O] to
enter the Quick set mode.
w Push [
√√
]/[
∫∫
] several times to select ‘SPLIT,’ then
push [
ΩΩ
CLR] or [OK
≈≈
] to select the split function
ON.
e Push [OK
≈≈
] to select ‘DELTA,’ then push [OK
≈≈
]
several times to move the cursor to desired tuning
steps, then
push [
√√
]/[
∫∫
] to change the frequency.
• After exiting the Quick set mode, the TX frequency is indi-
cated in the function display.
[I/O] [Ω CLR]/[OK ≈]
[∫]/[√]
é-RIT-------0
--SPLIT-----ç-DELTA-å
------------0.000.0
--BEEP-LV---5
é-RIT-------0
--SPLIT-----ç-ON-å
--BEEP-LV---5
Q-SET-MODE(VFO)
--MODE------ç-USB----å
è-RF-GAIN---9
--SQL-LV----30
--PRE-AMP---ON
■ Split frequency operation

Icom IC-F7000 Specifications

General

Brand	Icom
Model	IC-F7000
Category	Transceiver
Language	English