Icom IC-F7000 Instruction Manual

46
6
SET MODE
6
DD
Setting SELCALL
q Push [
∫∫
]/[
√√
] several times to select ‘SELCALL,’
then push [OK
≈≈
] to edit ‘SELCALL.’
w Push [
∫∫
]/[
√√
] to select the desired item.
• Push [
ΩΩ
CLR] to return the set mode menu .
e Push [
ΩΩ
CLR]/[OK
≈≈
] to set the values or condi-
tions for the selected item.
r After all setting is finished, turn power OFF and ON
again to exit the Initial set mode.
SELCALL-
--ID-SIZE-----4
è-TIME-OUT----60
--SILENT------OFF
--SYNC-TIME---2
é-SELCALL---å
--ALE-
--GENERAL
[Ω CLR]/[OK ≈]
[∫]/[√]
Selcall ID Size
This item selects the Selcall ID size from 4 digit or 6
digit. (default: 4)
SELCALL-
--ID-SIZE-----ç-4-å
è-TIME-OUT----60
--SILENT------OFF
--SYNC-TIME---2
Selcall Silent Mode (Ignore the call)
This item sets the automatic answer back function for
the Selcall. (default: OFF)
When OFF is selected, the transceiver automatically
answers back if your station ID is called.
SELCALL-
--ID-SIZE-----4
è-TIME-OUT----60
--SILENT------ç-OFF-å
--SYNC-TIME---2
Selcall Preamble
This item sets the preamble time for calling of the Sel-
call. Selectable time from 2 sec. or 6 sec.
(default: 2 sec.)
SELCALL-
--ID-SIZE-----4
è-TIME-OUT----60
--SILENT------OFF
--SYNC-TIME---ç-2-å
Auto mute
This item resets or cancels the call mute setting when
the scan resumes in Selcall or ALE. (default: ON)
When Auto mute is ON, the call mute setting is auto-
matically set when the paused scan restarts. When
OFF is selected, the call mute setting is cancelled at
the time of the received call and when the scan has
paused.
é-AUTO-START--OFF
é-AUTO-MUTE---ç-ON--å

Icom IC-F7000 Specifications

General

Brand	Icom
Model	IC-F7000
Category	Transceiver
Language	English