6
1
PANEL DESCRIPTION
1
DD
Frequency indication
q
OPERATING MODE INDICATOR
Shows the selected operating mode.
•“USB,” “LSB,” “AM,” “CW,” “FSK,” “AFSK,” “ALE-U,”
“ALE-L” or “EMAIL” appears depending on operating
mode and setting. (Selectable mode is USB only for AUS
version.)
w TRANSMIT/RECEIVE INDICATOR
➥ “RX” appears when signals are received or the
squelch is open.
➥ “TX” appears during transmit when the split func-
tion is OFF.
e TRANSMIT/RECEIVE FREQUENCY INDICATOR
Shows the transmit/receive frequency of the chan-
nel. Receive frequency is displayed during recep-
tion, transmit frequency is displayed during trans-
mission when the split function is OFF.
r TRANSMIT INDICATOR
“TX” appears during transmit when the split function
is ON.
t TRANSMIT FREQUENCY INDICATOR
Shows the transmit frequency when the split func-
tion is ON.
y PREAMPLIFIER INDICATOR
“P.AMP” appears when the Preamp function is ON.
u S-METER INDICATOR
Shows the receiving signal strength during receive.
i TRANSMIT POWER INDICATOR
Shows the selected transmit output power.
•“HI,” “MID,” “LO” appears when the transmit power is
set to high power, middle power, low power respectively.
o MUTE INDICATOR
➥ “V” appears when the voice mute is selected.
➥ “L” appears when the signal level mute is se-
lected.
➥ “S” appears when the call mute is selected.
!0 TIME INDICATOR
Shows time data.
To Next Page
Loading...
