Trouble Inputs 28
Outputs 31
Bell/Siren Output 31
Relay Outputs 32
Reader Outputs 32
Hardware Configuration 33
Configuring a Controller via the Web Interface 33
Setting the IP Address from a Keypad 33
Temporarily Defaulting the IP Address 34
Defaulting a Controller 35
LED Indicators 37
Power Indicator 37
Status Indicator 37
Fault Indicator 37
Ethernet Link Indicator 37
Modem Indicator 38
Reader Data Indicators 38
Bell Indicator 38
Relay Indicators 38
Input Indicators 39
Mechanical Diagram: PRT-CTRL-DIN 40
Mechanical Diagram: PRT-CTRL-DIN-IP 41
Mechanical Layout 42
Technical Specifications 43
Current and Validation Example 45
New Zealand and Australia 46
Intruder Detection Maintenance Routine 46
Peripheral Devices 46
Testing Frequency 46
Recommended Routine Maintenance Procedures 47
European Standards 50
UK Conformity Assessment Mark 52
UK PD 6662:2017 and BS 8243 52
UL and ULC Installation Requirements 53
UL/ULC Installation Cabinet Options 53
Central Station Signal Receiver Compatibility List 53
PRT-CTRL-DIN | Protege GX DIN Rail Integrated System Controller | Installation Manual 4
To Next Page
Loading...
