Need help?Do you have a question about the ID Lock 150 and is the answer not in the manual?
General| Operating Temperature | -20°C to 50°C |
|---|---|
| Color Options | Black, Silver |
| Auto Lock | Yes |
| Backup Key | Yes |
| Access Methods | PIN code, RFID card |
| Power Source | 4 x AA batteries |
| Battery Life | Approximately 12 months |
| Material | Stainless Steel |
| Technology | Bluetooth |
| Weather Resistance | IP54 |
| Compatibility | Compatible with most standard doors |
Specifies the essential tools needed to properly fit the ID Lock 150.
Step-by-step guide for installing the strike plate flush with the door jamb.
Fastening the strike plate with screws for optimal resistance.
Aligning the latch bolt direction with the old lock for proper function.
Steps to loosen, adjust, and potentially swap handles for correct installation.
Making a precise 10mm through hole in the door leaf for the lock.
Adjusting flanges for optimal door closure and latch/deadbolt mating.
To Next Page
