IDEC FT1A Series User Manual

8: I NSTRUCTIONS /F UNCTION B LOCKS R EFERENCE
8-14 S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378
Pulse Output FB
This section describes the pulse output FB of the SmartAXIS and its functions. The pulse output FB outputs pulses from the pulse
output port according to the specified settings.
Data Logging FB
This section describes the data Logging FB of the SmartAXIS and its functions. The data Logging FB saves log data for devices to
the SD memory card.
Symbol Name and Diagram Function
Output
inversion
FBD manual
page
PULS
Pulse Output
Outputs pulses at the specified frequency. X 15-1
PWM
Pulse Width Modulation
Outputs pulses at the specified frequency and duty
cycle.
X 15-6
RAMP
Ramp Pulse Output
Outputs pulses with the frequency change function. X 15-11
ZRN
Zero Return
Outputs pulses while the proximity signal is off. X 15-21
ARMP
Advanced Ramp
Output pulses with the frequency change function
according to the settings configured in the frequency
table.
X 15-26
PULS
EN OUT
INI
PWM
EN OUT
INI
RAMP
EN OUT
INI
DIR
ZRN
EN OUT
INI
DE
ARAMP
EN OUT
INI
INT
Symbol Name and Diagram Function
Output
inversion
FBD manual
page
DLOG
Data Log
Saves the values of the specified devices in the
specified data format as a CSV file on the SD
memory card.
– 16-1
TRACE
Data Trace
Saves the values of the previous number of scans for
the specified device in the specified data format as a
CSV file on the SD memory card.
– 16-8
DLOG
EN OUT
TRACE
EN OUT

IDEC FT1A Series Specifications

General

Brand	IDEC
Model	FT1A Series
Category	Controller
Language	English