S
MART
AXIS P
RO
/L
ITE
U
SER
'
S
M
ANUAL
FT9Y-B1378 12-7
12: R
EMOTE
I/O
4. Configure the IP address and port number of the remote I/O slave to connect.
Note: The default port number of the remote I/O slave is 2110.
5. Click OK.
When the settings are correctly completed, the details configured in the Remote Host dialog box are displayed in the Remote
Host No. drop-down list.
6. Configure the receive timeout.
7. Click OK.
Configuring the remote I/O master is completed.
To Next Page
Loading...
