IDEC FT1A Series User Manual

12: R EMOTE I/O
12-14 S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378
Using Saved Remote I/O Slave Settings
Operation procedure
1. In the Remote I/O Slave Configuration dialog box, click Open.
The Open dialog box is displayed.
2. Select the configuration file (*.frs) to use and click Open.
The remote I/O slave settings are loaded.
Notes:
• When the remote I/O slave settings are read, the existing settings in the dialog box are overwritten.
• If you specify an invalid file, an error message is displayed and the remote I/O slave settings are not loaded.

IDEC FT1A Series Specifications

General

Brand	IDEC
Model	FT1A Series
Category	Controller
Language	English