60. picture HDD information
Clue: means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is
no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up
all the damaged hard disks,then install a new one.
* behind serial number means the current working disk such as 1*. If the corresponding disk is damaged,
the information will show “？”.
11.2 BPS
Display the code stream（Kb/S）and hard disk capability （MB/H）in real time. It displays as the wave
sketch map.
61. picture BPS infomation
To Next Page
Loading...