IEI Technology DM-150GS/R-R30 User Manual

DM Series Monitor
Page 29
5.2.3 Packing Lis t
All the monitors in the DM series are shipped with the following components:
 1 x DM-150/170/190 series LCD monitor.
 1 x AC power cable
 1 x VGA cable
 1 x 60W power adapter
 5 x Replacement round head screw
 5 x Replacement flat head screw
 5 x Replacement wire strain band
 1 x Touch panel RS-232 cable
 1 x Touch panel USB cable
 1 x Touch Pen
 1 x Utility CD
 1 x Power cable for terminal block (Optional for M model)
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
5.3 Pre-ins tallation Preparation
5.3.1 Tools
Before installing the DM series LCD monitor, make sure the following tools are on hand:
 Philips (crosshead) screwdriver: All the retention screws on the system are
Philips screws.
 Soft working mat: When the DM series LCD monitor is installed, the screen
is placed on the working surface. It is therefore important to rest the MPC
industrial workstation on a soft at that cannot damage the LCD screen on the
front of the DM series LCD monitor.

IEI Technology DM-150GS/R-R30 Specifications

General

Brand	IEI Technology
Model	DM-150GS/R-R30
Category	Monitor
Language	English