IFM O1D300 - Page 35

35
UK
14 Factory setting
On delivery the parameter setting menu is not displayed completely� Only the pa-
rameter values [Uni], [EMP], [cEMP], [cMED] can be set� The complete parameter
setting menu is only accessible when the reference level has been set�
Parameter Setting range Factory setting Own setting
Uni cm, m, inch Cm
OU1 Hno, Hnc, Fno, Fnc Hno
SP1 [cm] 20�0���999�5 100
rP1 [cm] 20�0���999�5 80
OU2 Hno, Hnc, Fno, Fnc, I, U I
SP2 [cm] 20���999�5 200
rP2 [cm] 20���999�5 180
ASP [cm] 20���999�5 0
AEP [cm] 20���999�5 979�5
dr1 [s] 0���0�1���5 0
dr2 [s] 0���0�1���5 0
FOU1 ON ; OFF OFF
FOU2 ON ; OFF OFF
DFO [s] 0���0�1���5 0,2
EMP [cm] 20�0���999�5 20�0
CMEd [cm] 20�0���999�5 —
DiS ON ; OFF ON
rATE [Hz] 1���33 15
mEAn [s] OFF; 1���60 OFF
Technical data and further information at www�ifm�com