www.ikegps.com/quickstart Page 125 www.ikegps.com/support
7. Choose the COM Ports tab. Choose New Outgoing Port and tap Next. Select a COM port
that is available.
8. Important: Deselect (clear) the Secure Connection checkbox. Deselecting this option
ensures that the device disconnects the Bluetooth connection only when you tell it to.
9. Tap Finish to save the settings. Tap OK and Done to close the Wireless Manager
application.
Configuring ActiveSync on a Bluetooth-enabled desktop computer to synchronize
through the Serial Port Profile
1. Make sure ActiveSync is set up properly on your desktop computer.
2. Make sure there are no current ActiveSync connections on your desktop. Note: If another
device is already connected to the desktop, serial ports do not appear available. To fix
this, unplug the connected device, then tap Refresh on your ike.
3. On the Today screen of your ike, tap on the Wireless Manager icon and make sure
Bluetooth is on or discoverable.
4. Within Wireless Manager, select Menu then tap Bluetooth Settings.
5. Select the Devices tab.
6. Tap New Partnership.
7. Tap on the name of the desktop computer, then tap Next.
8. Enter a passkey on your ike.
9. Enter the same passkey on your desktop computer.
10. Select ActiveSync on your ike. If no ActiveSync option appears in the list of available
services on your ike, check the ActiveSync configuration on your desktop.
11. Tap Finish to save the settings. Tap OK > Done to close the Wireless Manager
application.
12. On your ike, tap Start > Programs > ActiveSync. Choose Connect via Bluetooth.
Connecting to a desktop computer using a Bluetooth dongle
1. Make your ike discoverable.
2. Select the COM Ports tab.
3. Choose New Outgoing Port.
4. Select the device and tap Next.
5. Select an available COM Port.
6. Important: Deselect (clear) the Secure connection option. Deselecting this option
ensures that the device disconnects its Bluetooth connection only when you tell it to.
7. Tap Finish to save your settings.
8. On your desktop computer, right-click the Bluetooth icon on your menu bar.
9. Select Add Bluetooth device.
10. Select Let me choose passkey.
11. Type in a passkey.
12. On your ike, type in the same passkey.
13. Tap Next, OK, and Done.
Print from ike to a Bluetooth printer using the Serial Port Profile
Currently, no built-in Windows Mobile 6 application supports printers. However, you can
use third-party printing programs such as PrintBoy
®
to print data from ike with a Bluetooth
printer.
To Next Page
Loading...