www.ikegps.com/quickstart Page 126 www.ikegps.com/support
Before you set up a third-party print application, you need to first discover the Bluetooth
printer. To do so, follow these steps:
1. On your ike, make sure Bluetooth is on and that your ike is discoverable. (See the
previous section for instructions.)
2. In the Wireless Manager, tap Menu then Bluetooth Settings.
3. From the Devices tab, select New partnership.
4. When the printer appears on the list of devices, select it.
5. Tap Next.
6. Enter the passkey and tap Next.
7. Select Serial Port.
8. From the COM Ports tab, tap New Outgoing port.
9. Select the printer.
10. Tap New COM port.
11. Deselect the Secure Connection option.
You can now print using a third-party print application you install on your ike. For details
about using the application to print, see the documentation that came with the application.
Dial-Up Networking (DUN) Profile
This profile allows you to connect to the Internet using a cell phone dial-up connection or
cordless modem. Instructions for partnering with both device types are described below.
Connecting to the Internet using a cell phone dial-up connection
1. Make your cell phone discoverable. (See the user documentation that came with your cell
phone for instructions.)
2. On your ike, tap on the Wireless Manager icon on the Today screen. (For more details,
see the previous section.)
3. Tap Menu > Bluetooth Settings.
4. Select the Turn on Bluetooth checkbox and make sure Make the device discoverable to
other devices is deselected.
5. In the Devices tab, choose New Partnership.
6. Select your cell phone from the list of devices and tap Next.
7. Enter any passkey on your ike.
8. Enter the same passkey and any other requested information on your cell phone.
9. On your ike, select Dialup Networking, then tap Next.
10. Tap Start > Settings > Connections tab > Connections.
11. Choose Add a new modem connection.
12. Enter a name for the connection and select Bluetooth as the modem.
13. Tap Next.
14. Select the name of your cell phone, then tap Next.
15. Enter the phone access number according to your phone carrier
’
s specifications. Tap
Next.
16. Enter a user name, password, and domain as specified by your network administrator.
17. Tap Advanced.
18. Fill in the remaining boxes as appropriate. Tap OK when you are done.
19. Tap Finish. Now you should be able to connect to the Internet on your ike through your
phone’
s
dialup connection.
To Next Page
Loading...