www.ikegps.com/quickstart Page 127 www.ikegps.com/support
Connecting to the Internet using a cordless modem
To connect to the Internet using a cordless modem, follow the steps below:
1. Tap on the Bluetooth icon on the Today screen to open Wireless Manager. Make sure
Bluetooth is on. (See the previous section for details.)
2. Tap Menu > Bluetooth Settings.
3. In the Mode tab, make sure Turn on Bluetooth is selected and that Make the device
discoverable to other devices is deselected.
4. Open the Devices tab and choose New Partnership.
5. When the cordless modem device is found, tap on it.
6. Enter the passkey.
7. In the Partnership Settings screen, make sure Serial Port is not selected and that Dialup
Networking is selected.
8. Tap Save.
9. Tap once on the device name to select it.
10. Tap Start > Settings > Connections tab > Connections.
11. Choose Add a new modem connection.
12. Enter a name.
13. Select Bluetooth as the modem.
14. Tap Next.
15. Select the name of the modem and tap Next.
16. Enter your ISP number as provided by your ISP provider and tap Next.
17. Type in a user name and password.
18. Choose Advanced.
19. Change the baud rate to 115200.
20. Fill in the remaining boxes as appropriate. Click OK when you
’
re done.
21. Tap Finish.
Now that you have established a dial-up network connection, you can check email or look
at a webpage using one of two methods. The first method is to let an application do the
work. (This option is especially useful with cell phones.) The second method is to do the
work yourself. Instructions for each method follow.
Method 1: Use an internet browser or application
1. Open Internet Explorer.
2. Fill in the network login boxes.
Method 2: Do it yourself
1. From the Today screen, tap Start > Settings > Connections tab > Connections.
2. Choose Manage existing connections.
Tap and hold on a connection and choose Connect from the menu that appears.
Human Interface Device (HID) Profile
This profile allows you to connect with Human Interface Devices like Bluetooth keyboards
and mice. To make a connection, follow these steps:
1. Make sure Bluetooth is on or discoverable. Create a Bluetooth partnership with the
device. (See the previous section for instructions on how to do these tasks.)
2. Make sure the HID is ready for pairing and select New Partnership to search for a
To Next Page
Loading...