The default tasks for the Span Height ikeTool will be shown.
A red star will indicate the mandatory tasks.
Tap the Span Height task to start the video preview screen
Aim at the wire. At this point in the process, your ike needs a
valid GPS position, along with the angle and distance to the
wire. Once these criteria are all satisfied, the Ready to
capture indicator will turn green to indicate that it is OK to
proceed. Tap the Next button when you are happy with the
distance measurement.
Tip: The distance measured in this step is critical to
obtaining a good height measurement. Observing the laser
distance measurement at this point to ensure that you get
the expected result will help to improve the overall accuracy.
To Next Page
Loading...