Image Access bookeye 3 User Manual

Operation Manual Page 31
Format
The Format control selects between various standard paper formats. If Auto is selected,
the scanner scans the maximum format and then crops the document to its real size. This
function is highly advanced and works with default values most of the time.
The Auto function can also be statically configured with the two sliders Auto Density and
Additional Margin on the right side.
If User is selected the User defined format control opens. It allows to
set the values for Height and Width of the area to be scanned. It also
allows to define the position of the area to be scanned. The position is
set by the values for X Offset and Y Offset.
Note: The point of origin for X Offset and Y-Offset is defined in the upper left corner of
the document area. Only positive values are allowed.
Picture 17: X- and Y Offset definition
Splitting Image
The Splitting Image button allows splitting the image into two pages although only one
scan is performed.
Auto Density
The Auto Density value defines the brightness level of the background. All areas that are
darker are considered background and will be used to find the borders of the document.
Additional Margin
A value for Additional Margin can be added to or taken away from the image. It is
defined in units of pixels.

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English