Image Access bookeye 3 User Manual

Operation Manual Page 51
B.2 The Setup Screen
Although most settings on the system level can be performed only in the Poweruser
access level, some user defined settings are available on the start screen. The User
access level also allows showing certain information about the system like power up time,
remaining lamp life time or firmware version.
Start your browser and enter the IP address of the scanner to get access to the scanner.
The start screen (see Picture 10) will open.
On the start screen click the button Setup Device .
The next screen shows the login levels User , Poweruser and Admin .
Picture 42: Login screen

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English