Image Access bookeye 3 User Manual

Page 44 Operation Manual
B.1.7.3 Output Option Copy
This output option prints directly to a previously installed network printer. The Option key
is used to configure the remotely connected printer.
Picture 38: Output Option Copy
Remote Printer
Description
Printer Preset
Choose a printer configuration out of five possible sets of
parameters. If you click on “Change Name” you can
change the name of this set.
Connection Type
Choose between IP Networking and SMB Printer Queue.
Address
(with IP Networking only)
Enter the IP address of the printer.
Port (9100)
(with IP Networking only)
Enter the IP port of the remote printer. Default is port 9100.
Connection Timeout
(with IP Networking only)
Choose the timeout for connecting to the remote printer
before the connection is aborted.
Port (139)
(with SMB Printer Queue only)
Enter the IP port of the remote printer. Default is port 139
Server Authentication
(with SMB Printer Queue only)
Select Yes or No
SMB Path
(with SMB Printer Queue only)
Enter the path of the directory where the printer is
established.

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English