Operation Manual Page 49
Enter the user name for authentication at the outgoing mail
server.
Enter the password for authentication at the outgoing mail
server. The password is stored using encryption.
Choose the connection protocol. SMTP is the most
common protocol.
Choose the timeout for connecting to the outgoing mail
server before the connection is aborted.
Enter the file name prefix. A time stamp will be added to
this prefix to form the complete file name.
Type in the recipient of the e-Mail.
Format: fully qualified e-Mail address.
Type in the sender of the e-Mail.
Format: fully qualified e-Mail address.
Type in the e-Mail subject. (Optional)
Type in a reply address for answers. (Optional)
Format: fully qualified e-Mail address.
notification?
Request for a notification when the recipient has opened
the mail. Note: This feature is not supported by all mail
servers or clients.
Note: Each change of an entry field is transferred to the scanner immediately.
To Next Page
Loading...
