Page 14 of 50
6 Visualisation software release 1.0.5.17
6.1 Main tool bar buttons
Load new measurement data from EPM-XP
Open stored measurement data set
Save data as ASCII file (*.csv) from all measurements
Print screen page
Print all sceeen pages
Cross On function
Program exit
Delete measurements at EPM-XP
Selection window of cylinder
p/alpha, p/v diagram
Indication Pmax 10 cycles
Indication of Pcomp 10 cycles (only on two strokes)
Save a reference file
Close and open reference file
Save Engine data
Load Engine data
Save shifted values
Delete Engine data
Load selection
Automatic shift of cylinder curve to reference curve
Funktion for to optimize Pcomp position
Only on two-stroke application available
To Next Page
Loading...