Page 21 of 50
6.4.1.7 Save shifted curves
After shifting all curves into reference curve please press “Save Shift” to save shifted curves
and the following window will open.
6.4.1.8 Delete measurement on EPM-XP
EPM-XP must be connected via USB cable to PC
After transferring data to PC the operator has the opportunity to delete all measurements via visualisation
software or to override existing data during next measurement on the engine.
Press “Delete Measurement” to delete all measurement at EPM-XP.
For to delete selected measurements at EPM-XP unit please see also chapter 5.2 !
To Next Page