IMES EPM-XP - Enter Scavenge Air Pressure of Selected Load; Indication of IPOWER and IMEP on Screen Page Cylinder

Operation manual EPM-XP
Software Release l.0.5.17 2019-01-29
Page 30 of 50
6.5.1.2 Enter scavenge air pressure of selected load
Enter scavenge air pressure of selected load in steps from 0.1 …4 bar and press “OK” to store in measurement
file.
6.5.1.3 Indication of IPOWER and IMEP on screen page “Cylinder”
Remark: Based on mathematic algorithm IPOWER and IMEP value of each cylinder will be calculated
automatically on two stroke application.
Indication of IMEP
and IPOWER