NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
133
PRINTER
Selecting Printer in the Preferences menu opens a window to the right of the preferences
menu with the following options: Network Printer and Report Configuration.
NETWORK PRINTER
It is possible to print via network (Ethernet) or Airprint
®
/ IPP compatible (supporting PDF
format) printers in the network.
Note: IPP version 2.2 is required and some printer configuration settings might need to be
changed in order to allow communication with the NanoPhotometer
®
.
Enter the IP of the network printer to the input window.
Note: For printing on network printer the NanoPhotometer
®
needs to be connected to the
network either via Ethernet (LAN cable) or WiFi network.
Note: If a printer is directly connected to the NanoPhotometer
®
via USB, this printer will have
the highest priority and will be the printer used by default when selecting Print on
NanoPhotometer
®
. In order to print utilizing a printer on the network, please disconnect the
installed USB printer.
To Next Page
Loading...
Need help?
General
