To Next Page

To Previous Page

NanoPhotometer

N120/NP80/N60/N50/C40 User Manual Version 4.3.1

DATA TRANSFER VIA FILE SERVER

All data saved on the NanoPhotometer

can easily be accessed from and transferred to a

computer via the NanoPhotometer

file server. Connection options are LAN/WLAN, USB

cable or WiFi Hotspot.

It is possible to create user accounts for password secured file server access. User accounts

for file server access can be activated in Preferences see page 131 File Server Access.

 File Server Access via LAN/WLAN

For the file server access via LAN/WLAN it is necessary that both the computer and the

NanoPhotometer

are connected to the same LAN/WLAN network. For connection of the

NanoPhotometer

to LAN/WLAN see page 129 Network.

For Windows computer open the Windows explorer and enter the serial number or the

NanoPhotometer

IP in the address bar of the Windows Explorer (e.g. \\M80798\ or

\\Assigned IP Address\).

Note: Serial number and IP address of the NanoPhotometer

can be found in the

NanoPhotometer

software under Preferences/General/About.

For a MAC computer open the "Connect to Server" dialog in the "Go" menu of the Mac OS

X Finder and enter the NanoPhotometer

serial number or the active NanoPhotometer

address in the server address field to connect.

Note: Serial number and IP address of the NanoPhotometer

can be found in the

NanoPhotometer

software under Preferences/General/About.

Implen NanoPhotometer N120 User Manual

Questions and Answers: