Implen NanoPhotometer N120 User Manual

NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
20
CONNECTIVITY
 USB A
There is a USB A port on the front as well as the rear panel of the NanoPhotometer
®
which
is compatible with standard portable USB 2.0 storage devices (back) and USB 3.0 (front) for
direct data transfer in a variety of formats including Excel. It is also possible to connect a
mouse, keyboard, barcode reader, DYMO printer or HP printer directly to the
NanoPhotometer
®
.
Note: We recommend using FAT/FAT32 formatted 2.0 USB flash drives. The USB flash
drive size is due to the standard formatting currently limited to 32 GB. Encrypted USB flash
drives are not compatible with the NanoPhotometer
®
.
Note: Cordless Bluetooth mice are not supported. Use wired mice only.
Note: Connect mouse and keyboard before starting the NanoPhotometer
®
.
 USB B
There is a USB B port located on the rear panel of the instrument which is compatible with
the USB cable provided to connect the NanoPhotometer
®
to a computer. This USB
connection can be used to control the NanoPhotometer
®
via computer.
 LAN
There is an Ethernet (LAN) connection port on the rear panel of the instrument which
enables the NanoPhotometer
®
to connect with the local network. This Ethernet connection
can be used for data transfer from the NanoPhotometer
®
to a local network, to control the
NanoPhotometer
®
via a control device and network printing.
Data transfer is possible by saving on a defined network folder (see page 132 Network
Folder) or on the NanoPhotometer
®
file server (see page 56 Data Transfer via File Server).
Note: Plug in the LAN cable before starting the NanoPhotometer
®
.
Note: The maximum LAN cable length is 10 meters. Bit rate is 1 Gbit/s
 WiFi
The NanoPhotometer
®
is equipped with WiFi, which can be used as a WiFi network or as a
WiFi Hotspot. The WiFi network allows same functionality as the Ethernet connection
including direct printing via AirPrint / IPP compatible printers supporting PDF format.
Note: IPP version 2.2 is required and some printer configuration settings might need to be
changed in order to allow communication with the NanoPhotometer
®
The WiFi Hotspot provides the option to control the NanoPhotometer
®
by other WiFi devices
like computer, tablets or smartphones (tablets and smartphones not for N120).
WiFi Hotspot connection details:
SSID: NanoPhotometer
®
serial number
Password: Implenuser

Implen NanoPhotometer N120 Specifications

General

Brand	Implen
Model	NanoPhotometer N120
Category	Measuring Instruments
Language	English