NanoPhotometer
®
N120/NP80/N60/N50/C40 User Manual Version 4.3.1
45
Excel File
Measurement data can be saved as Excel file. This file type contains all measurement
information including raw data, results, and parameters.
Note: The saved files contain only the selected samples at the time the file is saved.
PDF File
Measurement data can be saved as PDF file. This file type contains all measurement
information including raw data, results, and parameters.
It is possible to configure the table columns for PDFs and printouts in preferences (page 134
Report Configuration).
Note: The saved files contain only the selected samples at the time the file is saved.
File Name
Enter the name for the file. Allowed characters are: A…Z a…z 0…9 , . - ( ) @ ! = _ ~ ; [ ] { } ‘
Note: Blank character is not allowed.
Storage
Shows folder directory to select the save location. Options include: NanoPhotometer
®
, USB
flash drive (if connected), Network folder (if defined) and Control Device. If Control Device is
selected the data will be transferred to the control device that is currently connected with the
NanoPhotometer
®
.
Note: It is not possible to save IDS files to a control device like computer (PC/Mac), tablets
or smartphones.
Auto Save
To prevent data loss, all measurements are automatically stored as IDS file on the internal
memory of the NanoPhotometer
®
. These backup copies can be found in the Autosave folder
of the NanoPhotometer
®
(Stored Results/NanoPhotometer/Autosave) for up to ten days.
Files contain the base name Backup, the method name, and a time/date stamp.
After ten days the autosave files are automatically moved to an autosave archive folder. The
autosave archive folder can only be accessed via NanoPhotometer
®
file server (see page 56
Data Transfer via File Server). Data in the autosave archive folder are not automatically
deleted.
The content of the Autosave Archive folder can be deleted via the action button in Stored
Results:
To Next Page
Loading...
Need help?
General
