iNetVu
®
Mobile Platform Installation Manual Page 10 of 93
1.5 iNetVu
®
Controllers
The iNetVu
®
Antenna Controllers have been designed to automate the operation of
Mobile systems.
Key Features:
• Automatic azimuth, polarization, and elevation pointing calculation
• GPS/Glonass receiver for determining antenna latitude and longitude coordinates
• Fluxgate compass for determining orientation/direction of iNetVu
®
Mobile
Platform
• Non-volatile, flash memory for storing satellite locations and configuration data
• Automatic dish repositioning to previously accessed satellites (if the vehicle or
structures location is unchanged)
• Slim, 1U high rack or desktop mounted unit
• Continuous monitoring of antenna drive status
• RS-232 remote control serial interface.
• USB interface
• L-Band RF detector to support Ku and C band satellite operations
See the Controller Manuals for more details.
To Next Page
Loading...