iNetVu
®
Mobile Installation Manual Page 15 of 93
3.2 Recommended Tools
The following tools are recommended to have handy during the installation and operation of
the iNetVu
TM
Mobile System.
• RG6 (coax) Cable Stripper and Crimping tool
• Wrenches – 3/4, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16 (all Qty 1 except 2 for 1/2)
• 1/2 Ratchet with 3/4, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16 sockets
• Allen Key Set. Both Standard and Metric.
• Phillips Screwdrivers. Assorted set
• Flat Screwdrivers. Assorted set
• Ball peen hammer
• Plastic hammer
• Pin drift punches. Assorted sizes
• Grease gun
• WD 40
• Satellite Recognition Device (i.e. Spectrum Analyzer, etc.)
• Emery cloth (Sandpaper for metal)
• Utility Knife
• Pliers
• Sidecutters
• Vice grips
• Hacksaw
To Next Page