iNetVu 1500 - Page 53

iNetVu
®
Mobile Installation Manual Page 53 of 93
5. Verify Focal Point (ABCD) Geometry. Measure from the outer-most edge on the top
and bottom edge of the reflector. Ensure that dimensions are within ¼ ” of the values
below depending on the type of polarization cage you have installed, whether it be Ku,
or C Band ( Circular/Linear).
Fig. 41: Fully Assembled Reflector Assembly
6. Congratulations! The 1.8m Reflector has been successfully installed on to an iNetVu®
1800 Mobile Platform.
A
B
C
D
Ku-Band
(Patriot Reflector)
A – 70.30”
B – 72.90”
C – 43.20”
D – 40.50”
(Skyware Reflector Ver.2.0+)
A – 70.22”
B – 71.63”
C – 42.94”
D – 40.55”
C-Band (Circular/Linear)
A – 67.8”
B – 71.5”
C – 44.0”
D – 37.8”
Feed Horn
Reflector