Inficon Ecotec E3000 Original Operating Instructions

6Operation 35
Translation of the original operating instructions Ecotec E3000, kina22en1-19, 1507
Fig. 20: Changing the settings for gas 1
With the keys up and down you select a setting. Pressing the key “change” on the bottom
right opens the associated settings menu.
Gas The gas to search for is displayed. You can open the gas library with “change” and choose
from approx. 100 gases there.
User-defined gases are displayed at the end of the list.
Fig. 21: The gas library
Status “Status” shows whether the search for this gas is activated or deactivated. You can change
the setting at any time. If the search for a gas is deactivated, it will also be displayed in the
window “Measuring parameters”.
In the measurement window, the display of the measurement result for a deactivated gas
is dropped and the display is clearer.
Trigger and unit In the window “Trigger & unit”, you can set the trigger value with the keys on the left and
select the unit with the keys on the right.
Fig. 22: Setting trigger value and unit

Inficon Ecotec E3000 Specifications

General

Brand	Inficon
Model	Ecotec E3000
Category	Security Sensors
Language	English