8 Maintenance 63
Translation of the original operating instructions Ecotec E3000, kina22en1-19, 1507
8Maintenance
8.1 Calling up and managing maintenance
information
In the main menu you can call up information regarding the last operational states of the
device and its maintenance by selecting “History & maintenance”. Here you will find
especially the list of the last error messages. You will also determine which maintenance
work has to be confirmed and confirm maintenance.
Fig. 40: Selection options in “History & maintenance”
Error history The error history includes the errors and warnings that occurred during the operation of
the Ecotec E3000. Date and time are shown followed by an identification for the error or
the warning (E… with errors and W… with warnings), with a brief description of the error
or the warning.
Fig. 41: List with errors and warnings
To have the full warning or error message displayed, select the appropriate line and press
the key with the magnifying glass. Detailed information for possible causes is also
specified for many messages.
Calibration history This list shows all calibrations that were carried out during the operation of the Ecotec
E3000. Information provided includes
Date and time
Type of calibration (internal or external)
Number of gases (only with external calibration)
Calibration factor
To Next Page
Loading...
Need help?
General
