Inficon Ecotec E3000 Original Operating Instructions

10 Appendix 85
Translation of the original operating instructions Ecotec E3000, kina22en1-19, 1507
10.3 Menu tree
2 Start / sleep
3 Service Service PIN
5 Measuring parameter 5 Gas 1 Gas 8 Edit
6 Gas 2 Status
7 Gas 3 Trigger&Unit
8 Gas 4 Search & Limit
Internal calibration
Mass and position
Cal. factor
Last calibration
Cal. Method
Gas definition Gas definition 8 Edit
Name
Massposition
Normalisation factor
Molecule mass
6 Settings 2 Vacuum & access 2 Zero
3 Zero time
5 Flow limits upper flow limit
lower flow limit
6 Sensitivity check
7 Calibration
8 Change Menu-PIN
3 Audio 2 Beep sound
3 Device speaker
5 Audio Sniffer
6 Alarm profile
7 Volume
5 Setup I-Guide 2 I-Guide ON/OFF
PGM. 1...10 3 Edit:
Name
Gas A
Gas B
Glob. Trigger A
Glob. Trigger B
Number of measuring points
Measuring time
Wait time
4 Button ON/OFF
6 Miscellaneous 2 Language
3 Time & Date
4 Sniffer light
5 Pressure unit
6 Leak rate filter
7 Alarm delay
8 Wake up
7 Display 2 Contrast
3 Peak hold
6 Gas display handle
8 Interfaces 2 Control location
3 Recorder outputs 6 Recorder output scale
7 Recorder output gas
5 Setup PLC 6 Define PLC inputs
7 Define PLC outputs
6 RS232 protocol
7 Baud rate & End sign
8 ECO-Check
7 History&Maintenance 2 Error history
3 Calibration history
4 Select filament
5 Maintenance intervals
6 Maintenance history
7 Confirm maintenance 2 Maintenance plan
3 Warning reminder
4 Sniffer line filter
6 Lubricant reservoir
7 Main air filter
8 Replace ECO-Check
8 Info 1/9 General data
2/9 Turbo molecular pump data
3/9 Transpector data
4/9 ECO-Check data
5/9 Sniffer line information
6/9 I/O port data
7/9 Analog data
8/9 Analog data (2) CAL --> External calibration
9/9 RS232 Adjust IGS
Main menu

Inficon Ecotec E3000 Specifications

General

Brand	Inficon
Model	Ecotec E3000
Category	Security Sensors
Language	English