3.5.6 Instructions for Items in the Counter
1. Start value : Start value of the counter.
2. End value : End value of the counter
3. Reset value : Value to be reset when the function of "Reset Counter" of the Photocell 2
is used.
4. Step size : 1 at default, if set as 2, the counter will become "1, 3, 5, 7, ...".
5. Direction : Increase or decrease can be selected.
6. Repeat Count : 1 at default, printing times of each current value. For example, if set as
2, each counter will be printed for 2 times.
7. Leading Char : Leading character in front of the counter. For example, a counter range
from 1 to 999, when the print counter is “1" and the leading character is "blank space",
the printing result is "1". When the leading character is "0", the printing result will
become "001".
8. INC/DEC : It is used for nesting use between all the counters in the printer.
9. Type : The counter can be converted to printing in special form, such as 1D barcode
and 2D Barcode. For more details please refer to “3.5.4 Additional remarks for Barcode
User Field”.
10. Mod Count : 10, 16, 26, 32, 34, 36 optional.
11. Exclude Char : When 32 or 34 Mod is selected, 4 or 2 unprinted letters can be
customized.
12. Alarm Delay : Set the delay of the counter alarm, available for system build-in
“COUNTER" only
13. Alarm Duration : Set the duration of the counter alarm, available for system build-in
“COUNTER" only
14. Alarm Value : Set the value of the counter alarm, which needs to be within the Start
and End Value.
15. Hidden Times : Set the number of times this counter needs to be hidden in the
message. The default value is "0", indicating that it is not hidden.
16. Print Times : Set the number of times this counter needs to be printed in the message.
The default value is 1. For example, when the Hidden Times and the Print Times are
1, the print is performed once and disappears once.
17. Trailing Char : Set the suffix following the counter, the default is empty.
To Next Page
Loading...