Innovative Technology BV50 - 4 Mechanical Installation; 4.1 Compatibility

<< Back to Contents
Copyright © Innovative Technology Ltd 2020 Doc: BV50 User Manual
Version: 1.0
Page 10 of 63
3.4.2 Supply Currents
Supply Current
Nominal
Maximum
Standby
0.2A
0.4A
Running
1A
1.5A
Peak
2.5A
3.0A
3.4.3 Power Supply Guidance
The BV50 requires a stable 12V DC / 3.0A power supply. Please check the power
requirements of your host machine and other peripherals to dimension a suitable
power environment for your machine setup.
TDK Lambda manufactures suitable power supplies. Please see table below for
further details.
Power Supply Unit
Specification
RS Stock Code
Farnell Stock Code
TDK Lambda SWS50-12
+12 V DC / 4.3 A
466-5869
1184645
3.4.4 110V Interface
The BV50 can also be supplied with a 110v AC to 12V DC adapter which can be
mounted to the rear of the unit. A link to this power supply can be found below:
http://innovative-technology.com/shop/accessories/bv20-110v-power-supply-unit-detail
3.5 Interface Logic Levels
Interface Logic Levels
Logic Low
Logic High
Inputs
0V to +0.5V
+3.7V to +12V
Outputs with 2K2Ω pull-up resistor
+0.6V
Pull-up voltage of host interface
Maximum Current Sink
50mA per Output
3.6 Reliability Data
• MCBF for the BV50 is 100,000
3.7 Media Requirements
The BV50 is capable of handling multiple denominations simultaneously, the media
that can be accepted includes but is not limited to:
• Polymer and windowed notes
The minimum and maximum dimension for media IN is as follows:
Media Requirements
Length
Width
Min
110mm
56mm
Max
156mm
66mm