Innovative Technology BV50 - Checking Communication Connections

<< Back to Contents
Copyright © Innovative Technology Ltd 2020 Doc: BV50 User Manual
Version: 1.0
Page 47 of 63
3. Check pins
Check the connector
pins on the BV. Make
sure there are no bent
or broken pins.
4. Reset Machine
If everything is
connected properly,
reset the machine and
check the power again.
9.5 Checking Communication Connections
1. Check Connections
Make sure all cables are
secured and connected. If there
are other devices inline, make
sure the cable going into and
out of those devices are secure.