<< Back to Contents
Copyright © Innovative Technology Ltd 2020 Doc: BV50 User Manual
Version: 1.0
Page 11 of 63
4 MECHANICAL INSTALLATION
4.1 Compatibility
4.1.1 Hardware Compatibility
4.1.1.1 Machine Mounting
The BV50 has been designed to retrofit into standard amusement facias with the
mounting kit, as such it is a drop-in replacement for many amusement style bill
validators.
Innovative Technology Ltd. has a policy of continuous product improvement. Due to
design changes older model or product bezels (and cashboxes) may not be
compatible with the BV50. However, new product deliveries always include a bezel
and cashbox that must be used.
Innovative Technology Ltd. has a policy of continuous product improvement. Due to
design changes older model or product bezels (and cashboxes) may not be
compatible with the BV50. However, new product deliveries always include a bezel
(and cashbox) that must be used.
4.1.1.2 Machine Interfacing
The BV50 has a 16-pin connector which has the same pin-configurations as many of
ITL validators. The optional 110v interface connects directly into the 9-pin Molex
connector traditionally found in amusement style machines.
To Next Page
Loading...