Innovative Technology NV11 - Frequently Asked Questions

NV11 Manual Set – Section 2 15
Copyright © Innovative Technology Ltd 2012 GA963-2
2.5 Frequently Asked Questions
a. Why are there no DIP switches on the unit?
 The NV11 has no dipswitches. Configuring the unit is carried out using a
configuration button mounted on the front of the Note Float module – see
Section 1, subsection 1.5 of this manual set for more information.
b. In what orientation can I use the NV11 validator?
 The NV11 can only be mounted horizontally - see Section 1, subsection 1.1 of
this manual for more information on mounting the validator. Please check the
ITL website to see the currently available range of cashboxes and bezels.
c. Some or all notes are not accepted
 Check that no inhibits are set in the Validator Manager software (see Section 3
of this manual set). If the problem persists, contact ITL Support for further
assistance.
d. How do I clean the validator?
 Follow the instructions given in subsection 2.1 of this manual.