Innovative Technology NV11 - Updating Firmware and Datasets

NV11 Manual Set – Section 3 29
Copyright © Innovative Technology Ltd 2012 GA963-2
3.2 Updating Firmware and Datasets
CAUTION!
Do not power off
Powering off the NV11 when updating the
firmware or dataset can cause the validator to stop
working.
The NV11 validator firmware and dataset can be updated very easily using the PiPS
software. The process uses NV9USB dataset files which can be downloaded from the
Innovative Technology Ltd website:
Information
Combined data files
The firmware and dataset files for the NV11 validator
are combined into a single file, so both will be
updated when you carry out the update.