Innovative Technology NV11 - Frequently Asked Questions

NV11 Manual Set – Section 1 16
Copyright © Innovative Technology Ltd 2012 GA963-2
1.11 Frequently Asked Questions
a. Why are there no DIP switches on the unit?
 The NV11 has no dipswitches. Configuring the unit is carried out by using the
configuration button mounted on the front of the Note Float module – see
subsection 1.5 of this manual for more information.
b. In what orientation can I use the NV11 validator?
 The NV11 can only be mounted horizontally - see subsection 1.1 of this manual
for more information on mounting the validator. Check the ITL website to see
the currently available range of cashboxes and bezels.
c. How do I check which interface has been set?
 You can check which interface has been selected by using the configuration
button mounted on the front of the Note Float module – see subsection 1.3 of
this manual for more information.
d. How do I change the interface type?
 You can change the interface type by using the configuration button mounted
on the front of the Note Float module – see subsection 1.5 of this manual for
more information.
e. Some or all notes are not accepted
 Check that no inhibits are set in the Validator Manager software (see Section 3
of this manual set). If the problem persists, contact ITL Support for further
assistance.