Innovative Technology NV22 - Bezel Fitting (Standard Bezel)

NV9 Spectral Range Manual
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: GA02156 NV9S Range User Manual
Version: 1.1
Page 21 of 54
4.3.2 Bezel Fitting (Standard Bezel)
1. Positioning the bezel for fitting
When fitting the bezel onto the validator ensure that the bezel sits in place ready to
be interlocked with the locating pins on the housing assembly.
2. Sliding the bezel into place
Once the bezel is in place with respect to the locating
pins, slide the Bezel back until it clicks into place.
ensure that both sides have clicked into place.
WARNING!
Ensure bezel is secured to
the validator
Slide back