NV9 Spectral Range Manual
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: GA02156 NV9S Range User Manual
Version: 1.1
Page 34 of 54
1. Placing the lozenge into place
When placing the lozenge back into the housing assembly, ensure that the lozenge
is secured into the grooves of the rear side of the housing assembly, then push
down the lozenge.
2. Clicking the lozenge into place
After the lozenge is in place, push the lozenge latches down to click into place.
Ensure the lozenge is secured into grooves provided.
To Next Page
Loading...
