Unpacking and Transportation
‑60‑
Figure 3‑14 Lifting the T1 to T9 models
2. Hook the lifting lugs at the top of the AC drive with a lifting rope to do a diagonal
lift, slowly set the AC drive upright, and install it inside the cabinet.
Avoid stress on any side of the AC drive or placing it on an inclined surface. The AC drive is
large and heavy (close to 200 kg). If the inclination exceeds 5°, it may topple.
T13 models
1. Before installation, remove the fixing screws from the four corners of the
transportation pallet and the cabinet, and remove the pallet.
To Next Page
Loading...
