5G INDOOR CPE FX2000 USER GUIDE 10
Powering On
Turn on your FX2000 with the AC wall adapter power supply:
1. Plug the power cord into the power port on the back of the FX2000.
2. Plug the power adapter into an AC wall outlet.
WARNING! Use only the AC wall adapter power supply that came with the 5G Indoor CPE. Unapproved
AC wall adapter power supplies could cause the FX2000 to overheat or catch fire, resulting in serious
bodily injury, death, or property damage.
Identifying a Location
Use the Inseego Mobile App to identify the optimal location for your 5G Indoor CPE.
1. Scan the QR code to install the Inseego Mobile App from AppStore or Google Play, or visit
https://inseego.com/inseego-connect-get-app
to download the App.
2. Follow instructions within the Inseego Mobile App to connect to your 5G Indoor CPE and
perform a location survey to identify the ideal location for your 5G Indoor CPE.
NOTE: Make sure to place your 5G Indoor CPE on a sturdy surface.
Connecting to the FX2000
With the 5G Indoor CPE, Wi-Fi devices and wired devices can connect to the mobile broadband network
simultaneously.
Connecting Devices Wirelessly
You can connect to your 5G Indoor CPE with your computer, tablet or other wireless devices that have
Wi-Fi and Internet browser software.
To connect a Wi-Fi capable device to your FX2000:
1. Make sure the 5G Indoor CPE is powered on, and the indicator LED is blue or green.
2. On the device you want to connect to the Internet, open the Wi-Fi settings or application and in
the displayed list of available networks, find the Primary Wi-Fi network name printed on the
bottom of your FX2000.
3. Click Connect or otherwise select the network name.
4. When prompted, enter the Primary Wi-Fi password printed on the bottom of the FX2000.
Your Wi-Fi capable device is now connected to the Internet.
To Next Page
Loading...
Need help?
General
