5G INDOOR CPE FX2000 USER GUIDE 61
Inseego Connect Tab
Use this page to enable and configure settings for connection with Inseego Connect. Inseego Connect
is a cloud platform product that provides 360 degree visibility and secure accessibility into your
deployment from a single platform.
Inseego Connect
By default, the connection to Inseego Connect is ON. Slide the ON/OFF slider to OFF if you wish to
disable the connection.
Inseego Connect Status
Connection State: The status of the Inseego Connect connection.
UP – FX2000 is communicating with Inseego Connect servers.
DOWN – FX2000 is NOT communicating with Inseego Connect servers.
Last Reported: The time when FX2000 last sent a packet to Inseego Connect servers.
Reporting Interval: This is the interval at which your FX2000 will send packets to the Inseego Connect
server. NOTE: A shorter interval means more data usage.